English
-
中文 -
English
LSR Products Customization
OEM/ODM
Product Category
Respirator/Mask
Personal Protective Equipment
Non toxic and odorless: Silicone is a non-toxic, odorless, and tasteless material, which makes it very suitable for making protective masks that come into direct contact with the human body, without causing harm to the human body.
Soft and skin friendly: Silicone is soft and does not cause pressure on the face when worn, and it is not easy to cause allergic reactions, making it suitable for long-term wear.
High sealing performance: Silicone protective masks can provide high sealing performance, effectively blocking harmful substances from the outside world.
Aging resistance: Silicone material is not easily aged and can maintain its softness and elasticity for a long time, with a long service life.
Easy to clean: The silicone protective mask is easy to clean and disinfect, convenient for repeated use, and reduces the cost of use.
Respiratory Protection: Dust Mask, Gas Mask, KN95 Face Mask, Dust Filter Cotton, Gas Carbon filter.
Baby Products
Baby Feeding Products
Safety and Health: Silicone baby products are usually made of food grade silicone materials, which do not contain harmful substances, are non-toxic and tasteless, and are harmless to the health of babies. This material does not release harmful gases at high temperatures and is suitable for disinfection by boiling at high temperatures. It can even be heated in a microwave oven and meets FDA and other standards.
High temperature resistance: Silicone products can withstand high temperatures, are not easily deformed, can withstand boiling and steam cleaning at high temperatures, and maintain product hygiene. In addition, the temperature resistance range of silicone is generally between -40 to 230 degrees Celsius, or even higher, making it suitable for use in microwave ovens and ovens.
Soft and skin friendly: Silicone products have good softness and elasticity, suitable for babies to use, protecting them from collisions and friction. The silicone nipple is very soft, similar to a mother's nipple, which can make it easier for babies to accept the bottle.
Silicone baby silicone bottle, nipple, silicone straw, silicone molars, dental gel, mouthpiece, juice bag, silicone toothbrush, silicone spoon
Medical Device
Medical devices and accessories
Characteristics of medical silicone products
1. Biocompatibility: Medical silicone products have good biocompatibility and can come into contact with human tissues without causing allergies or rejection reactions.
2. Flexibility: Medical silicone products have good flexibility and can adapt to the curves and changes of the human body.
3. High temperature resistance: Medical silicone products can be used at high temperatures without deformation or release of harmful substances.
4. Transparency: Medical silicone products have good transparency and can observe the internal conditions of the human body.
Silicone Optial Lense
Silicone Optical Lens
Characteristics of Silicone Optical Lens
High temperature resistance: Silicone lenses have excellent high temperature resistance and can withstand temperatures up to 200 degrees Celsius, which allows them to remain stable in high temperature environments and is suitable for applications that require high temperature resistance.
Transmittance and optical efficiency: The transmittance of silicone lenses is about 94%, comparable to glass lenses, and higher than PMMA and PC lenses. In addition, silicone lenses have high optical efficiency and are suitable for high-end optical application environments.
UV resistance: Silicone lenses have excellent UV resistance and can be used outdoors for a long time without yellowing or fading, making them suitable for outdoor applications.
Lightweight and Protection Level: Silicone lenses are lightweight and not easily broken, with a built-in protection level of IP67 or higher, reducing installation and maintenance costs.
Other characteristics: Silicone lenses also have high heat resistance, high impact resistance, low refractive index, low dispersion, and other properties, making them suitable for fields such as optics, medical, communication, and automotive.
Silicone Gasket/Seal
Gasket/Seal
Silicone seals have the following main characteristics:
High temperature resistance: Silicone seals can maintain their elasticity and sealing performance in high temperature environments, typically withstanding temperatures up to 200 ° C or higher, and can even be used for a period of time at 350 ° C.
Corrosion resistance: Silicone seals have good resistance to chemicals such as acids, alkalis, salts, and some organic solvents, effectively preventing the leakage of liquids or gases.
Aging resistance: Silicone seals have excellent aging resistance and can maintain the stability of their physical properties during long-term use, without being affected by ozone and ultraviolet radiation.
Cold resistance: Silicone seals still have good elasticity in low temperature environments, and some special formulations of silicone rubber can even maintain good performance in the temperature range of -70 ° C to 70 ° C.
Other performance: Silicone seals also have good breathability, insulation, non toxicity, environmental safety and other characteristics, suitable for various smooth surface materials, and have good resilience and flexibility.
No data
Plastic Parts
Plastic Molding
Characteristics of plastic injection molding:
High molding accuracy: Plastic injection molding technology can produce products with accurate shape and size, with excellent consistency and stability.
Low material cost: Compared to metal products, plastic injection molded parts use lower material costs and are easy to obtain, thereby reducing production costs.
High production efficiency: Plastic injection molding equipment can produce products of the same size on a large scale in a short period of time, with simple processes and easy operation, improving production efficiency.
High degree of design freedom: The design of plastic injection molded parts can be flexible and varied, and can be innovated and improved according to customer requirements, product characteristics, and market demand to meet the needs of different customers.
2K injection/Over mold
2 Color Injection/Over-molding
The characteristics of two-color and overmolding:
Material selection: Two-color injection and overmolding including different hardness silica gel, silicone + hardware, silicone + plastic,like PPSU,PC,PA,PEEK etc.
SIL LINK
For over 10 years, we have specialized in liquid silicone molding and mold customization, consistently adhering to high-precision and high-quality customization services. We provide customer with superior quality products.
点击右上角
分享给朋友吧
GET IN TOUCH
No.202 ,Yixian Road,Nanlang Street,Zhongshan City.China
Contacts: +86-18824950408 Tim Liang
E-Mail : sales01@sil-link.com
SIL LINK
OUR SERVICE
LSR Mould Customized
Silicone Products OEM
Professional team, reliable service, quality assurance,
We provide you with better injection molding solutions
Send a inquiry
Let us know your demand, We will provide you with suitable solutions and reasonable prices.
© Sil Link Silicone Products.Co.,Ltd. All rights reserved
